SparFuse

Name: SparFuse

Because I have not posted for a while I have a double Banger for you today!

SparFuse 1

Materials:

• Sparkler Dust
  
• Masking Tape
  
• String
  
• Scissors
  
• Ignition Source
• Hair Spray
  

Steps:

1. Lay out a piece of masking tape and put string down the center longways.
2. Cut the tape so that the string is seen. This is a fuse for the Fuse.
   
3. Pour large amounts of sparkler dust along the line of the string
   
4. Put another piece of masking tape on top of that.
   
5. Roll it up longways and tape at the two ends and the center to keep the cylindrical shape of it.
6. Spray the string that is visible!
   
7. Light it!
   

Details:

This is an equivalent to the fuse that you buy in shops (such as visco fuse). It is bendable and sputters, as long as you put enough sparkler dust. It can be made into any size! This is a great alternative to visco for you people who live in countries where you can't buy fuse!


SparFuse 2

Materials:

• 2 Sparklers
• Wire Cutters
  
• Masking Tape
  
• Ignition Source

Steps:

1. Cut the metal half of 2 sparklers.
   
2. Place the two smaller ends together so that the sparklers touch quite alot.
3. Roll up the tape.
   
4. Light one end.
   

Details:

Although it isn't flexible like SparFuse 1 it is definitely easier to make!



Videos
Check out the side
<<<<<<<<
<<<<<<<<

BakVin

Name: BakVin

Materials:

• Film Canister
  
• Liplock Bag
  
• Vinegar
  
• Baking Soda
  

Steps:

1. Cut the Ziplock bag into a small cone.
   
2. Fill 1/4 of the film canister with vinegar.
   
3. Fill 1/2 of the cone with Baking Soda.
   
4. Carefully insert the cone into the canister so that the baking soda and vinegar don't connect.
   
5. Put the lid on.
6. Shake for 1 second then throw.
   

Details:

Well we all know that when mixed baking soda and vinegar make bubbles but did you know that when confined to a small space it also makes a bomb.

This non-illegal explosion can make a good suprise to trash a party or to distract someone.

I took a video so it will be up soon when I go to my dads house and he burns the stuff for me!

vid's

Guess What? Here are all/most of the vid's that I have taken of my attempts! I hope it loads!

Sparky

Name: Sparky

Materials:

• Electrical Tape
  
  
• Foil
  
  
• Approx 22 Sparklers
  
  
• Cotton String
  
  
• Fuse (optional)
  
  

Steps:

1. Get 21 of the 22 sparklers ad bind them together with the cotton string
2. Put the other sparkler in the middle of the 21 sparklers to make a fuse (or use your own fuse)
   
   
3. Very tightly bind all of the sparklers together with electrical tape, taking care not to break the dust off the sparklers. Bind over the top of the sparklers to for best effect... Just don't cover the fuse!
   
   
4. Wrap it in several layers of aluminium foil.
5. Finally bind it tightly with electrical tape so that you cannot see any foil!
   
   

Details:

This will go with a pretty fast flame. It's pretty cool!

Hey!

Hey,

I know I havent posted for a while but I just moved to high school and it's harder to do attempts.



I'm still here!



Get back to you in the holidays

Powered by ScribeFire.

PotNit1

Name: PotNit1

Materials:

• Potassium Nitrate
• Granulated Caster Sugar
• Al-Foil (Aluminium foil)
• Stove (optional)
• Pot
• Matches cut at the center (+--)
• Stirrer
• Scales (electronic work the best)

Steps:

1. Mix the potassium nitrate and the sugar at a 60/40 ratio. Put 20 grams sugar and 30 grams potassium nitrate.
2. Put this into the pot and stir every 30 seconds until it goes dark brown and the consistency of mud.
3. Pour this into a mold made of al-foil (|__|)
4. Insert the match heads.
5. Let it cool down .
6. Get some strike paper and move the paper over the match heads fast.
7. This should ignite and give off some pretty good smoke!

Details:

Warning: When cooking use number 2 on an electric stove or a low setting.

This may ignite at any time when cooking so do not overcook or leave on heat when smoking.

It is recommended that you don't smoke cigarettes/cigars while making this.

I will get a video up soon!

Photos:

Black N White

Name: Black n White

Materials:

• Electrical Tape
• 600ml coke bottle
• Masking Tape
• 100 sparklers
• Stanley Knife
• Scissors
  
• Detonator/Lighter/Match

Steps:

1. Cut open the coke bottle (in half)
2. Make 5 Groups of 20 sparklers
3. Bind each group with masking tape
4. Bind all 5 Groups into 1 with masking tape; with flammable tape coming out of the middle
5. Put all the ends of the sparklers out of the lid of the coke bottle
6. Cut off the bottom of the coke bottle.
7. Cover the outside in masking tape and then electrical tape
   
8. Stick this thing into the ground, light the flammable tape and run
   
9. Boom

Details: It is simply light and run... If you're lucky the sparklers/sparks will zoom into the air.

Don't try this if you're an idiot. You will more than likely get a severed hand. -

Video:

Detonator

Name: Detonator

Materials:

• 1 8 AA Battery Holder
• 8 AA's
• Nichrome Wire
  
• 4m Speaker Wire
• 2 Small Aligator Clips
  

Steps:

1. Strip the speaker wire on all ends
2. Connect one end of the speaker wire to the battery pack
   
3. Connect the other end of the speaker wire to the 2 aligator clips
4. Insert a 14cm piece of nichrome wire to the aligator clips
5. Put some flammable tape onto the wire
6. Connect all of the batteries to the holder to start the ignition

Details:

Just because the wire isn’t glowing doesn’t mean that it won’t be hot. The wire can get up to 1400°c, so don’t touch it unless you have disconnected the battery pack an waited 5 minutes. You will need to replace the wire if you have a big fire but it is only like 60c a metre so it’s ok.

The Ping Pong Triplet

Name: The Ping Pong Triplet

Materials:

• 3 Ping Pong Balls
• 3 Half-Way-Cut Sparklers
• Lots of Sparkler Dust
• 20cm/7.8" flammable Tape
• Stanley Knife/X-acto Knife

Steps:

1. Cut a hole in the top of each ping pong ball with the stanley knife.
2. Fill the ping pong balls with sparkler dust.
3. Put the half sparklers sticking out of each ping pong ball.
4. Connect them (the sparklers) together with flammable tape.
5. Light one end of the flammable tape.

Details:

When all of the sparklers burn down you will have a big explosion flying out of the holes you made in the top of the ping pong balls. It will eventually die down and burn it's self out but it is preferable to put it out as soon as it has gone off in case of a wind.

Flammable Tape

Name: Flammable Tape

Materials:

• Masking Tape
• Hair Spray

Steps:

1. Lay a piece of masking tape on the ground and coat it in hairspray
2. Fold the masking tape in half
3. It is now ready to light
   

Details:

The hairspray is flammable. The masking tape absorbs the flammable hairspray to make it very flammable! You must only spray the masking tape straight before you make the bomb. Once the flammable tape is dry it is useless and you must spray it again.