Friday, 30 March 2007

Hey!

Hey,

I know I havent posted for a while but I just moved to high school and it's harder to do attempts.



I'm still here!



Get back to you in the holidays



Powered by ScribeFire.

Saturday, 10 February 2007

PotNit1

Name: PotNit1

Materials:

  • Potassium Nitrate
  • Granulated Caster Sugar
  • Al-Foil (Aluminium foil)
  • Stove (optional)
  • Pot
  • Matches cut at the center (+--)
  • Stirrer
  • Scales (electronic work the best)

Steps:


  1. Mix the potassium nitrate and the sugar at a 60/40 ratio. Put 20 grams sugar and 30 grams potassium nitrate.
  2. Put this into the pot and stir every 30 seconds until it goes dark brown and the consistency of mud.
  3. Pour this into a mold made of al-foil (|__|)
  4. Insert the match heads.
  5. Let it cool down .
  6. Get some strike paper and move the paper over the match heads fast.
  7. This should ignite and give off some pretty good smoke!

Details:

Warning: When cooking use number 2 on an electric stove or a low setting.

This may ignite at any time when cooking so do not overcook or leave on heat when smoking.


It is recommended that you don't smoke cigarettes/cigars while making this.

I will get a video up soon!

Photos:


Sunday, 4 February 2007

Black N White

Name: Black n White

Materials:

  • Electrical Tape
  • 600ml coke bottle
  • Masking Tape
  • 100 sparklers
  • Stanley Knife
  • Scissors
  • Detonator/Lighter/Match

Steps:


  1. Cut open the coke bottle (in half)
  2. Make 5 Groups of 20 sparklers
  3. Bind each group with masking tape
  4. Bind all 5 Groups into 1 with masking tape; with flammable tape coming out of the middle
  5. Put all the ends of the sparklers out of the lid of the coke bottle
  6. Cut off the bottom of the coke bottle.
  7. Cover the outside in masking tape and then electrical tape
  8. Stick this thing into the ground, light the flammable tape and run
  9. Boom

Details: It is simply light and run... If you're lucky the sparklers/sparks will zoom into the air.

Don't try this if you're an idiot. You will more than likely get a severed hand. -

Video:

Saturday, 3 February 2007

Detonator

Name: Detonator

Materials:

  • 1 8 AA Battery Holder
  • 8 AA's
  • Nichrome Wire
  • 4m Speaker Wire
  • 2 Small Aligator Clips

Steps:

  1. Strip the speaker wire on all ends
  2. Connect one end of the speaker wire to the battery pack
  3. Connect the other end of the speaker wire to the 2 aligator clips
  4. Insert a 14cm piece of nichrome wire to the aligator clips
  5. Put some flammable tape onto the wire
  6. Connect all of the batteries to the holder to start the ignition
Details:

Just because the wire isn’t glowing doesn’t mean that it won’t be hot. The wire can get up to 1400°c, so don’t touch it unless you have disconnected the battery pack an waited 5 minutes. You will need to replace the wire if you have a big fire but it is only like 60c a metre so it’s ok.

Wednesday, 24 January 2007

The Ping Pong Triplet

Name: The Ping Pong Triplet

Materials:

  • 3 Ping Pong Balls
  • 3 Half-Way-Cut Sparklers
  • Lots of Sparkler Dust
  • 20cm/7.8" flammable Tape
  • Stanley Knife/X-acto Knife

Steps:

  1. Cut a hole in the top of each ping pong ball with the stanley knife.
  2. Fill the ping pong balls with sparkler dust.
  3. Put the half sparklers sticking out of each ping pong ball.
  4. Connect them (the sparklers) together with flammable tape.
  5. Light one end of the flammable tape.

Details:

When all of the sparklers burn down you will have a big explosion flying out of the holes you made in the top of the ping pong balls. It will eventually die down and burn it's self out but it is preferable to put it out as soon as it has gone off in case of a wind.


Flammable Tape

Name: Flammable Tape

Materials:

  • Masking Tape
  • Hair Spray

Steps:

  1. Lay a piece of masking tape on the ground and coat it in hairspray
  2. Fold the masking tape in half
  3. It is now ready to light

Details:

The hairspray is flammable. The masking tape absorbs the flammable hairspray to make it very flammable! You must only spray the masking tape straight before you make the bomb. Once the flammable tape is dry it is useless and you must spray it again.

Sparkler Dust

Name: Sparkler Dust

Materials:

  • Sparklers
  • Hammer
  • Airtight Container
  • Ice cream container

Steps:


  1. Get the hammer and bang the packet of sparklers
  2. Make sure all the sparklers are crushed
  3. Take the packet out and dump the powder into an ice cream container
  4. You can crush this for easy access
  5. Fill an air tight container with the sparkler dust you just made for safe keeping

Details:

This dust will not burn well by its self spread out. When in a reasonable sized pile and lit it will go off with quite force. Always use a fuse to light this stuff! It's Dangerous!